2026 Yamaha Tenere 700 World Raid Workshop Service Manual
Language: English
Format: Download link
Data type: PDF
Engine: 689 cm³ Liquid cooled 4-stroke
Wiring diagram: Included
Spare part code: LIT-11616-39-65
Transmission: Constant mesh 6-speed
Covered models:
Ténéré 700 World Raid:
BXD3 (XTZ7WRT)
BXD4 (XTZ7WRTC)
Spark plug:
NGK/LMAR8A-9
Spark plug gap 0.8–0.9 mm
Drive chain:
Size 520
Number of links 122
Fuse:
Main fuse 50.0 A
Terminal fuse 5.0 A
Headlight fuse 7.5 A
Brake light fuse 2.0 A
Signaling system fuse 7.5 A
Ignition fuse 1 10.0 A
Ignition fuse 2 7.5 A
Radiator fan motor fuse 15.0 A
Fuel injection system fuse 10.0 A
ABS control unit fuse 7.5 A
ABS solenoid fuse 15.0 A
Cruise control fuse 2.0 A
Backup fuse 1 7.5 A
Backup fuse 2 15.0 A
Electronic throttle valve fuse 7.5 A
2026 Yamaha Tenere 700 World Raid Valve Clearance:
Intake 0.11–0.20 mm
Exhaust 0.24–0.30 mm
Engine oil capacity and type:
Oil change 2.30 L (2.43 US qt, 2.02 Imp.qt)
With oil filter removal 2.60 L (2.75 US qt, 2.29 Imp.qt)
Quantity (disassembled) 3.00 L (3.17 US qt, 2.64 Imp.qt)
SAE viscosity grades 10W-40
Recommended engine oil grade API service SG type or higher, JASO standard MA
Table of contents:
General Information, Specifications, Periodic Checks and Adjustments, Chassis, Engine, Cooling System, Fuel System, Electrical System, Self Diagnostic, XTZ7WRT 2026 Wiring Diagram, XTZ7WRTC 2026 Wiring Diagram.
Does it include tightening torques?
Yes, it is included.
Does it include troubleshooting?
Yes, it includes troubleshooting, but only partially.
Why is my Yamaha Tenere 700 fuel pump not working?
Check these in order:
1) Fuses: main, backup, ignition and fuel injection.
2) Battery: clean the terminals, then recharge or replace it.
3) Main switch.
4) Fuel pump relay in the relay unit.
5) Fuel pump.
6) Stop/run/start switch on the right handlebar.
7) Fuel pump wiring: check every connection against the circuit diagram.
If all of these are OK, the ECU is the likely cause. To reach the parts, first remove the seat, the right side covers and the fuel tank. The [MODEL] service manual shows how to test each part step by step.
What should I check first if the fuel pump does not run?
Start with the fuses and the battery. A blown fuse or a weak battery is the simplest cause and the quickest to check.
Can a faulty handlebar switch stop the fuel pump?
Yes. If the stop/run/start switch on the right handlebar is faulty, the pump will not run, and the fix is to replace the right handlebar switch.